# Optimization problem formulation

## Overview

mrcal contains a solver used to compute the lens models and/or geometry. This is accessible via either

These are the main call in the mrcal-calibrate-cameras tool (to calibrate cameras) and mrcal-convert-lensmodel tool (to fit a different lens model into an existing model). The optimization routines are more general than what these tools provide, and can solve other problems, such as structure-from-motion. Note that the APIs for handling discrete points are still unstable, so the SFM functionality remains lightly-documented for now.

The solver moves around the state vector $$\vec b$$, which contains all the geometry and all the lens models. For any hypothesis $$\vec b$$, the solver can predict the pixel coordinates where the hypothetical cameras would observe their hypothetical world. The differences between these predicted pixel observations and the actual pixel observations we gathered from looking at chessboards are stored in a measurement vector $$\vec x$$. The solver then tries to find the set of geometry and lens parameters to best explain the observed pixel coordinates, so it seeks the $$\vec b$$ to minimize the cost function $$E \equiv \left \Vert \vec x \left(\vec b\right)\right \Vert ^2$$.

The optimization library interfaces with mrcal by invoking a callback function for each hypothesis $$\vec b$$ to test. This callback function computes $$\vec x$$ and the local gradients $$J \equiv \frac{\partial \vec x}{\partial \vec b}$$ (large and sparse). For analysis, this callback function is available by itself via

## World geometry

There are 3 different coordinate systems in the optimization:

• frame coordinate system: the local coordinate system of the chessboard. The chessboard is assumed mostly flat, with the grid of points lying in the $$xy$$ plane. The origin is at one of the corners.
• reference coordinate system: the "world" coordinate system in the optimization problem. This coordinate system is the common system that ties everything together. Each chessboard pose is represented as a transformation between the local chessboard frame and the reference frame. And each camera pose is represented as the transformation between the local camera frame and the reference frame. Note that this coordinate system doesn't necessarily have any physical meaning.
• camera coordinate system: the local coordinate system of each camera. The $$x$$ and $$y$$ axes are aligned with pixel coordinates in an image: $$x$$ is to the right and $$y$$ is down. $$z$$ is then forward to complete the right-handed system of coordinates.

So the data flow to project a particular chessboard corner which sits at $$\vec p_\mathrm{frame}$$ in the local chessboard coordinate system is:

$\vec q \xleftarrow{\mathrm{intrinsics}} \vec p_\mathrm{camera} \xleftarrow{T_\mathrm{cr}} \vec p_\mathrm{reference} \xleftarrow{T_\mathrm{rf}} \vec p_\mathrm{frame}$

where the intrinsics and the transformations $$T_\mathrm{cr}$$ and $$T_\mathrm{rf}$$ are all elements of the state vector.

### Geometric free variables

If too many transformations are left as free variables for the optimizer to find, the system will be under-determined, and the optimization routine will fail: complaining about a "not positive definite" (singular in this case) Hessian.

Example: we have 1 stationary camera observing 10 chessboards. We want to be able to uniquely represent the transformation between each chessboard and the camera, for a total of 10 transformations. If we optimize a camera pose $$T_\mathrm{cr}$$ camera and 10 separate chessboard poses $$T_\mathrm{rf}$$ for each chessboard, we will have 11 transformations in the optimization vector. Since 11 > 10, we have more variables in the optimization vector than are needed to uniquely describe the world. So the system is under-determined, and the optimization will fail.

In a vanilla calibration problem such as this, we would address this by fixing the reference coordinate system to one of the camera or chessboard frames. The mrcal convention is to fix the reference coordinate system to camera 0, setting $$T_\mathrm{cr}$$ to the identity transformation. In the above example, this would reduce the number of transformations being optimized from 11 to 10, which resolves the issue.

Any other method of making the optimization variables unique is valid also. For instance, the chessboard poses might be known. In that case we don't need to optimize any $$T_\mathrm{rf}$$, and solving for the $$T_\mathrm{cr}$$ is enough.

### The physical meaning of the reference coordinate system

The reference coordinate system is a single coordinate system common to the whole optimization problem that all the objects in the world can use to localize themselves. It does not have any physical meaning beyond that. In particular, the reference coordinate system is not attached to any fixed object in the world. Thus noise in the chessboard observations would shift the reference coordinate system, just as it would shift the camera and chessboard coordinate systems. The projection uncertainty documentation talks about this in depth.

## Calibration object

This is called a "chessboard" or just "board" in some parts of the code. The optimization code refers to the chessboard pose array as "frames".

When running a camera calibration, we use observations of a known-geometry object. At this time mrcal expects this object to be a planar regular grid of observable points, possibly with a small amount of deformation. Usually this object is a chessboard-like grid of black and white squares, where the observed points are at the corner of each square.

Detections of these corners serve as the input features to mrcal. mrcal is a purely geometrical toolkit, and this vision problem must be handled by another library.

### Board deformation

The calibration object is assumed to be nominally planar. However, large calibration boards used for calibration of wide lenses are never flat: temperature and humidity effects deform the board strongly-enough to affect the calibration. mrcal currently supports a simple 2-parameter deformation model. This model uses two axis-aligned parabolic factors. Let the chessboard grid span $$[-1,1]$$ along the $$x$$ and $$y$$ axes. Then I define the non-planar deformation as $$z \equiv k_x (1 - x^2) + k_y (1 - y^2)$$ with $$k_x$$ and $$k_y$$ being the two deformation factors being optimized by the solver. If the board were flat, $$k_x$$ and $$k_y$$ would be 0, and thus we would have $$z=0$$ everywhere. The deflection at the edges is 0, and is strongest at the center.

Empirically, this appears to work well: I get better-fitting solves, and less systematic error. And the optimal deformation factors $$k_x$$, $$k_y$$ are consistent between different calibrations.

Clearly, this does not work for especially strong or asymmetric deflections. There's a richer 5-parameter deformation model in a not-yet-released branch that appears to work even for asymmetric deflections. This needs more testing, and has not yet been released. Talk to Dima if you want to play with it.

## Lens behavior

The fundamental operation to map a point in the camera coordinate system to a pixel where that point would be observed by the camera is called projection. mrcal supports multiple methods to model the behavior of different lenses. Of particular note is that at this time, mrcal assumes that all projections are central: all rays of light are assumed to intersect at a single point (the origin of the camera coordinate system). So $$k \vec v$$ projects to the same $$\vec q$$ for any $$k$$. This is very convenient, mostly true, and almost every camera library assumes this. This assumption breaks down when projecting observations very close to the lens, with "close" being judged relative to the physical size of the lens. Extreme close-ups exhibit non-central behavior: While extreme close-ups are very good for calibration quality, the working distance is usually past the range where non-central effects are observable. So it is recommended to avoid the non-central regime by keeping the chessboard far-enough out to make the central model work well. Cross-validation can be used to verify whether noncentral effects are present. That said, support for non-central lenses is coming in a future release of mrcal, which will allow us to model the noncentral behavior.

## Optimization details

The mrcal solver is an optimization routine based on sparse nonlinear least squares. The optimization loop is implemented in libdogleg, which at its core uses the CHOLMOD solver to compute the Cholesky factorization, to then efficiently solve the linear system $$J^T J \vec a = \vec b$$ where the jacobian matrix $$J$$ is large and sparse.

The optimization problem is posed without constraints. This is achieved by using Rodrigues vectors to represent rotations. A different rotation representation, such as one using unit quaternions or rotation matrices would require constraints: not all sets of 4 numbers are a unit quaternion, and not all sets of 9 numbers are a valid rotation matrix.

The optimization algorithm is iterative, so it isn't guaranteed to converge to the global optimum. Thus it is imperative to pass a good seed (an initial estimate of the solution) to the optimization routines. The mrcal-calibrate-cameras tool achieves this by

1. Computing an initial estimate directly using geometry and some simplifying assumptions. These geometric seeding routines are available standalone:
2. Refining that estimate with a sequences of optimization problems that allow more and more of the parameters to vary. The final problem is the full problem where all the variables are free to move. The set of variables we're optimizing can be selected with the mrcal_problem_selections_t structure passed to mrcal_optimize() in C (or the do_optimize_... arguments to mrcal.optimize() in Python).

## State vector $$\vec b$$

The state vector $$\vec b$$ is controlled by the optimization algorithm as it searches for the optimal solution. This vector may contain

• intrinsics: the lens parameters of all the cameras in the optimization problem
• extrinsics: the poses of all the cameras in the optimization problem. These are specified as unconstrained rt transformations from some arbitrary "reference". coordinate system, to the camera coordinate system. These are represented by $$T_\mathrm{cr}$$ in the flow diagram above
• frames: the poses of all the chessboards in the optimization problem. These are specified as unconstrained rt transformations from the local chessboard coordinate system to some arbitrary "reference" coordinate system. These are represented by $$T_\mathrm{rf}$$ in the flow diagram above
• points: the location in the reference coordinate system of any discrete points being observed. A vanilla "calibration" problem wouldn't have any of these, but an SFM problem would have many
• calibration-object warp: the deformation of the calibration object

An optimization problem could contain all those things, but it usually only contains a subset, depending on the specific problem being solved. Common problems are:

• A vanilla calibration problem. We have stationary cameras observing a moving chessboard. $$\vec b$$ contains intrinsics and extrinsics and frames and the calibration-object warp
• Structure-from-motion. We have moving cameras observing a stationary world. $$\vec b$$ contains extrinsics and points.
• An intrinsics-fitting problem such as what mrcal-convert-lensmodel solves. $$\vec b$$ contains intrinsics and points

Any other combination is possible.

### State vector layout

When analyzing the behavior of the optimizer it is often useful to pick out particular elements of the full optimization vector $$\vec b$$. mrcal provides a number of functions to report the index and size of the block of $$\vec b$$ that contains specific data. In C:

And in Python:

If plotting a whole vector of state, it is helpful to annotate the plot to make it clear which variables correspond to each block of state. mrcal provides a helper function to help with this:

### State vector scaling

The nonlinear least squares-solving library used by mrcal is libdogleg, which implements Powell's dogleg method. This is a trust-region algorithm that represents the trust region as a ball in state space. I.e. the radius of this trust region is the same in every direction. And that means that the optimization will work best when each state variable in $$\vec b$$ affects the cost function $$E$$ evenly. Example of what we don't want: camera positions measured in km, while the chessboard positions are measured in mm, with both sets of these very different numbers stored in $$\vec b$$.

Clearly getting identical behavior from each variable is impossible, but we can scale the elements of $$\vec b$$ to keep things more or less even. mrcal applies this scaling, and the libdogleg optimization library never sees the full state vector $$\vec b$$, but the scaled vector $$\vec b_\mathrm{packed}$$. Similarly, it never sees the full jacobian $$J \equiv \frac{\partial \vec x}{\partial \vec b}$$, but rather $$J_\mathrm{packed} \equiv \frac{\partial \vec x}{\partial \vec b_\mathrm{packed}}$$. This means that the optimization callback functions report packed state. These are

To pack or unpack an array of state, mrcal provides some routines. In C:

And in Python:

## Measurement vector $$\vec x$$

Given a hypothesis state vector $$\vec b$$ mrcal computes a vector of errors, or measurements $$\vec x$$. The optimization algorithm searches the space of hypotheses $$\vec b$$, trying to minimize $$E \equiv \left \Vert \vec x \right \Vert^2$$.

We know where each point was observed in reality, and we know where the state vector $$\vec b$$ predicts each one would have been observed. So we can construct a vector of errors $$\vec q_\mathrm{err} \equiv \vec q_\mathrm{predicted}\left( \vec b \right) - \vec q_\mathrm{ref}$$.

From the noise analysis we derive a matrix of weights $$W$$ to construct

$\vec x_\mathrm{observations} \equiv W q_\mathrm{err} = W \left( \vec q_\mathrm{predicted}\left( \vec b \right) - \vec q_\mathrm{ref} \right)$

This is the bulk of the measurement vector.

### Regularization

In addition to $$\vec x_\mathrm{observations}$$, the measurement vector contains regularization terms. These are mostly-insignificant terms that are meant to improve the convergence of the solver. They are also aphysical, and cause a bias in the solution, so mrcal is careful to keep these small-enough to not break anything noticeably. The behavior of these terms is likely to change in the future, so I don't document these in detail; please consult the sources. Currently the logic is at the end of the optimizer_callback() function in mrcal.c.

It is possible to control whether a solve does/does not include regularization terms with the do_apply_regularization bit in mrcal_problem_selections_t or the do_apply_regularization key in the call to mrcal.optimize().

### Measurement vector layout

When analyzing the behavior of the optimizer it is often useful to pick out particular elements of the full measurement vector $$\vec x$$. mrcal provides a number of functions to report the index and size of the block of $$\vec x$$ that contains specific data. In C:

And in Python:

If plotting a whole vector of measurements, it is helpful to annotate the plot to make it clear which values correspond to each block of measurements. mrcal provides a helper function to help with this:

## Noise modeling

The projection uncertainty routine is used to gauge the effects of sampling error on the solve. This is done by modelling the noise in the input pixel observations, and propagating it through the solve. This assumes that model errors are insignificant.

If the model errors were significant, then

• the computed projection uncertainty would underestimate the expected errors: the non-negligible model errors would be ignored
• the computed calibration would be biased: the residuals $$\vec x$$ would be heteroscedastic, so the computed optimum would not be a maximum-likelihood estimate of the true calibration

### Noise on the inputs

I solve the calibration problem using Ordinary Least Squares, minimizing the discrepancies between pixel observations and their predictions. The pixel observations $$\vec q_\mathrm{ref}$$ are noisy, and I assume that they are zero-mean, independent and normally-distributed. In particular, I treat the 2 values in each observation ($$x$$ and $$y$$) as two independent measurements. I have no proof that the noise truly meets all those criteria, but empirical evidence suggests that these are all reasonable assumptions. And they simplify lots of analyses that we want to do. In order to propagate the input noise, we need to quantify it: for the $$i$$ -th observed point, what is $$\mathrm{Var}\left(\vec q_{\mathrm{ref}_i}\right)$$?

Chessboard corner detectors often make it easy to infer the relative accuracy levels between the different corners, as opposed to an absolute noise level for each one. Thus the implementation splits the observed noise into two parts:

• The baseline standard deviation of the noise $$\sigma$$. This is one value that applies to all the observations
• The scale $$s_i$$ applied to that baseline. These are different for each observed corner

The mrgingham corner detector, in particular, reports the resolution used in detecting each corner as a decimation level: level-0 is "full-resolution", level-1 is "half-resolution" and so on. From that decimation level we get the relative scale

$s_i \equiv 2^{\mathrm{level}}$

and we can define the 2x2 variance for each observed corner

$\mathrm{Var}\left( \vec q_{\mathrm{ref}_i} \right) = s_i^2 \sigma^2 I$

and the variance for all the pixel observations

$\mathrm{Var}\left(\vec q_\mathrm{ref}\right) = \mathrm{diag}\left(s_i^2\right) \sigma^2$

The remaining piece is to compute $$\sigma$$, but this is hard to measure directly. There's an attempt in mrgingham, but it doesn't obviously work well. Thus the current method is to estimate $$\sigma$$ from the solve residuals:

$\sigma = \sqrt{\mathrm{Var}\left( \vec x^*_\mathrm{observations} \right)}$

where $$\vec x^*$$ is the measurement vector at the optimum. If all the assumptions are satisfied and we have enough data, then the input noise is the only source of error, and the only thing that affects the optimal $$\vec x$$, and this way of evaluating $$\sigma$$ is reasonable. If we have too little data, we're going to be overfitting, and the $$\sigma$$ computed using the above method will be too low. The current thought is that this will be hard to do with chessboards and even a half-hearted calibration will always have enough data. So mrcal currently doesn't try to catch this case. This might be added in the future.

### Noise in the measurement vector $$\vec x$$

We know where each point was observed in reality, and we know where the state vector $$\vec b$$ predicts each one would have been observed. So we can construct a vector of errors $$\vec q_\mathrm{err} \equiv \vec q_\mathrm{predicted}\left( \vec b \right) - \vec q_\mathrm{ref}$$.

For the purposes of optimization we want to weight the errors of uncertain observations less than confident ones, and to do that we can use the same $$s_i$$ scale factor we computed earlier. For point $$i$$ I define the weight

$w_i \equiv \frac{1}{s_i}$

Let's construct a diagonal matrix of all these weights: $$W \equiv \mathrm{diag}\left( \vec w \right)$$. Then the measurement vector is

$\vec x_\mathrm{observations} \equiv W q_\mathrm{err} = W \left( \vec q_\mathrm{predicted}\left( \vec b \right) - \vec q_\mathrm{ref} \right)$

If we assume that the model fits the data and that we have enough data to not overfit (both reasonable assumptions), then

$\mathrm{Var}\left( \vec x_\mathrm{observations} \right) = W \mathrm{Var}\left( \vec q_\mathrm{ref} \right) W^T = \sigma^2 I$

where $$\sigma$$ is the input noise we're propagating. Furthermore, $$\vec x_\mathrm{observations}$$ is homoscedastic: each element as the same variance. I make two more (reasonable) assumptions:

• The rest of the measurement vector $$\vec x$$ (regularization) is insignificant
• I consider the linear problem at the local linearization of my nonlinear system

And then I can make a larger statement: the optimal parameter vector we compute from the least-squares optimization is the maximum-likelihood estimate of the true solution.

## Outlier rejection

Some of the input may not fit the model due to errors in the input data (chessboard corner mis-detections or motion blur for instance) or due to the model not being able to represent reality (insufficiently-flexible lens model or board deformation model for instance). Either of these would violate the noise model, which could bias the resulting estimate. Finding and detecting such points would eliminate such a bias.

Currently mrcal employs a very simple outlier-rejection scheme. More or less, all measurements that have $$x_i$$ beyond some $$k$$ standard deviations above 0 are thrown out as outliers. See markOutliers() for details.

This scheme is effective in handling small numbers of obvious outliers. Any subtle outliers will get through, and will poison the solve. So it is imperative that the input data is as clean as possible. More sophisticated methods are under development.